Brand: Jiuban
Model: JB/STA-1150
Name: Synchronized Thermal Analyser
一、Product Overview：
　　Synchronous thermal analysis combines thermogravimetric analysis (TG) with differential thermal analysis (DTA) or differential scanning calorimetry (DSC). In the same measurement, the information of TG, DTA or DSC can be obtained simultaneously by using the same sample.
　　Measure and study the following characteristics of materials: DSC: melting, crystallization, phase transformation, reaction temperature and reaction heat, combustion heat, specific heat. TG: thermal stability, decomposition, redox, adsorption and desorption, calculation of free water and crystalline water content, composition ratio, etc.
二、Technical parameters:
1. Temperature range：room temperature ~1250 C can be extended to ~1550 C.
2. Temperature Resolution：0.1℃
3. Temperature Fluctuation：+0.1℃
4. Heating rate：1-80℃/min
5. Temperature control methods：heating, constant temperature, cooling
6. Constant temperature time：0-300 minutes arbitrarily set
7. Cooling time：15 min (1000℃-100℃)
8. Balance measurement range：1mg~2g can be extended to 5g
9. DSC Range：0 ~500mW
10. DSC resolution：1 uW
11. Sensitivity：0.01mg
12. Constant temperature time：0-300 minutes arbitrarily set
13. Display mode：24 bit color, 7 inch LCD touch screen display
14. Atmosphere device：built-in gas flowmeter, including two-way gas switching and flow size control
                 Atmosphere: inertia, oxidation, reduction, static and dynamic
15. Software：Intelligent software can automatically record TG curve for data processing and printing experimental report forms.
16. Data Interface：Standard USB Interface
17. Power supply：AC220V 50Hz